Rolling and Drawing Machines
Basic Features Technical Specification
 |
•Rolls rotate on special roller bearings •The bearings are oil-lubricated by means of a centralized pressure system •The plate rolling mill incorporated a patented device that prevents plates from bulging during the rolling operations |
Roll diameter 110mm Roll width 175mm Maximum thickness 30mm Three-phased motor 5~7HP Production rate 1st Speed 5HP 8.5m/min 2nd Speed 7HP 17m/min |
 |
•The lubrication of the rolling mill is completely automatic •The reduction gears operate immersed in an oil bath •All 8 bronze cylinder supports are constantly lubricated •The plate rolling mill incorporated a patented device that prevents plates from bulging during the rolling operations •Other models available: Filly 125, 140, 150 |
Roll diameter 86mm Wire size 1~9mm Roll width 160mm Roll RPM 18~36min Max rolling thickness 24mm 2 speed motor 2.5~3.5HP Production Rate 5~10m/min |
Drawing Machines
 |
•The pulling roller and the wire collecting reel are moved by 2 seperate motors in order to use the reel to wind the wire from other processes •The clutch which controls the reel is made of bronze cone which allows it to draw wire with a small diameter with no breaks •There is a micro switch on the 5th pass to stop the machine at tge end of the drawing wihout pulling off the head of the skein •Other model also available is the Wire Drawing Machine - 12 Passage which has more functions compared to the 6 - passage |
Max. wire diameter 2mm Pulling Motor Power 2.7hp Reel Motor Power 0.3hp Drawing Speed 34-68 m/min Absorbed Power 7 A |